Introduction of mixed heating products

time：2023-03-06  source：  author：

1.Components processed by a variety of metals (copper, steel and aluminum) and combined with the hot mixing of new technology materials together constitute the mixed heating.
Its water consumption has been reduced by more than 80%. The 1 meter long 0.6 meter high radiator only uses 650 ml of water.
The heat source of the electric boiler is sent to the bottom of the radiator to conduct heat through the pipeline and circulating pump, so that the radiator itself is also hot.
Radiator temperature varies with the heat given by the heat source, generally between 38℃ and 130℃.
The use of mixed heating technology, 100 square meters of housing (2.4 meters to 2.6 meters high) with 6 kW frequency conversion electric boiler, with 8 groups of radiators, only 25 liters of water, about 30 minutes to make the surface temperature of the radiator reaches 60 degrees Celsius, indoor constant temperature only 3 to 4 hours.
The room temperature is kept at 18 to 20℃, the power consumption is 5-6 degrees per hour, and the energy saving is more than 50 percent.
And 1 meter long 0.6 meter high ordinary radiator, need 8-10 liters of water, 100 square meters of housing configuration of 6 to 8 groups of radiators, water consumption at least 160 to 180 liters, at least 14 kW electric boiler.
Initial heating for more than 2 days, radiator temperature to rise to 45 to 50 degrees Celsius, electricity consumption per hour more than 12 degrees.

1. The user's original electric boiler, gas furnace, coal boiler, steam boiler and liquid heat source heating products can be used in combination with this radiator.
2. Mixed heating products have been used by 900 customers in Ulaanbaatar, Mongolia. According to customer feedback, compared to the previous use of floor heating and other ordinary radiators, mixed heating products can save customers about 75% of electricity bills. Similar to burning coal, can save labor costs.
3. The working principle of hybrid heating is through a newly developed automatic heating liquid, which can conduct heat at 30℃.

5.The heating liquid is filled into the radiator by vacuum. The heating liquid is in the sandwich of the radiator.
6.Heat source through the copper tube heat conduction to the heat conduction fluid, the heat conduction liquid reaches the boiling point at 30℃, 45℃ began hot vaporization, about 70 to achieve the best hot vaporization, radiator surface temperature can reach more than 65℃.